#Nvidia geforce 930m max resolution full#

Maxwell GM206 GPU supports full fixed function HEVC hardware decoding. Maxwell second generation GM20x GPUs have an upgraded NVENC which supports HEVC encoding and adds support for H.264 encoding resolutions at 1440p/60FPS & 4K/60FPS compared to NVENC on Maxwell first generation GM10x GPUs which only supported H.264 1080p/60FPS encoding.

GM204 supports CUDA Compute Capability 5.2 compared to 5.0 on GM107/GM108 GPUs, 3.5 on GK110/GK208 GPUs and 3.0 on GK10x GPUs.

Second generation Maxwell also has up to 4 SMM units per GPC, compared to 5 SMM units per GPC. However, some of the ROPs are generally idle in the GTX 970 because there are not enough enabled SMMs to give them work to do and therefore reduces its maximum fill rate. Second generation Maxwell also changed the ROP to memory controller ratio from 8:1 to 16:1. Second generation Maxwell introduced several new technologies: Dynamic Super Resolution, Third Generation Delta Color Compression, Multi-Pixel Programming Sampling, Nvidia VXGI (Real-Time-Voxel- Global Illumination), VR Direct, Multi-Projection Acceleration, and Multi-Frame Sampled Anti-Aliasing (MFAA) (however support for Coverage-Sampling Anti-Aliasing (CSAA) was removed). When decoding video, a new low power state 'GC5' is used on Maxwell GPUs to conserve power.

#Nvidia geforce 930m max resolution software#

However, H.265 is not supported for full hardware decoding, relying on a mix of hardware and software decoding. Nvidia also claims an 8 to 10 times performance increase in PureVideo Feature Set E video decoding due to the video decoder cache paired with increases in memory efficiency. While it was once thought that Maxwell used tile-based immediate mode rasterization, Nvidia corrected this at GDC 2017 saying Maxwell instead uses Tile Caching. Maxwell provides native shared memory atomic operations for 32-bit integers and native shared memory 32-bit and 64-bit compare-and-swap (CAS), which can be used to implement other atomic functions. Dynamic Parallelism and HyperQ, two features in GK110/GK208 GPUs, are also supported across the entire Maxwell product line. GM107 supports CUDA Compute Capability 5.0 compared to 3.5 on GK110/GK208 GPUs and 3.0 on GK10x GPUs. Also, each Graphics Processing Cluster, or GPC, contains up to 4 SMX units in Kepler, and up to 5 SMM units in first generation Maxwell. Nvidia claims a 128В CUDA core SMM has 86% of the performance of a 192В CUDA core SMX. SMM allows for a finer-grain allocation of resources than SMX, saving power when the workload isn't optimal for shared resources. Texture units and FP64 CUDA cores are still shared. These units are connected by a crossbar that uses power to allow the resources to be shared.

This is in contrast to Kepler, where each SMX has 4 schedulers that schedule to a shared pool of 6 sets of 32 FP32 CUDA cores, 2 sets of 16 load/store units, and 2 sets of 16 special function units. The layout of SMM units is partitioned so that each of the 4 warp schedulers in an SMM controls 1 set of 32 FP32 CUDA cores, 1 set of 8 load/store units, and 1 set of 8 special function units. The structure of the warp scheduler is inherited from Kepler, which allows each scheduler to issue up to two instructions that are independent from each other and are in order from the same warp. Nvidia also changed the streaming multiprocessor design from that of Kepler (SMX), naming it SMM. Accordingly, Nvidia cut the memory bus from 192 bit on GK106 to 128 bit on GM107, further saving power. Nvidia increased the amount of L2 cache from 256В KiB on GK107 to 2В MiB on GM107, reducing the memory bandwidth needed. These new chips provide few consumer-facing additional features Nvidia instead focused on power efficiency. Main article: Maxwell (microarchitecture) First generation Maxwell (GM10x) ДЇirst generation Maxwell GM107/GM108 were released as GeForce GTX 745, GTX 750/750 Ti and GTX 850M/860M (GM107) and GT 830M/840M (GM108).